This unit started out as a worn and bulged MP 40 barrel. We removed the hardware and installed the front sight
ramp on a new barrel turned in our shop. It was then polished / buffed and hot blued. After attaching the
remaining hardware (also polished / buffed and hot blued), the barrel assembly will be ready for installation
on the customer's receiver.
IMPORTANT NOTES:
To avoid any damage to the front sight base and other parts, please let us remove the parts from your old,
worn out / bulged / damaged barrel. We have the technology to do this properly and safely.
DO NOT send us your entire MP 40. All we need is the barrel assembly.